The Ghost Immobiliser
Immobilisers can be a powerful weapon in the fight against car theft. They stop the vehicle from starting if it isn't equipped with a key fob. They also work well to stop hotwiring or other traditional forms of vehicle theft. Newer methods such as relay theft or key cloning are becoming more common.
The Ghost Immobiliser is designed to combat these trends and make your vehicle undetectable. It doesn't rely on LED indicators or radio signals or key fobs, and is quiet and discreet.
Easy to install
The Ghost Immobiliser is a revolutionary device that connects to the CAN data network inside your vehicle to stop key cloning and theft. It is a TASSA approved product, and insurance companies endorse it. It operates quietly and is almost undetectable to thieves. It makes use of buttons on your steering wheel, centre console and doors to create a unique pin code sequence that must be entered prior to being able to start your car. You can create as many as 20 different sequences to improve security. The system is easy to install and doesn't require any additional wiring or hardware.
It is recommended to use a reputable immobiliser CAN installer who is specialized in your particular vehicle model to ensure the most effective results. Ideally, they will have a workshop close to you where you can go to have your installation completed. You will also find a range of tools and equipment that can assist you in the installation. They will come with basic hand tools, multimeters insulation tape and heat shrink tubing to protect the connections. A user's manual will offer instructions specific to the wiring of your vehicle.
Before beginning the installation Before beginning the installation, disconnect the battery to prevent short circuits and airbag deployment. Double-checking the CAN L and H wires is essential because a mistake in identification could cause a misalignment of the system. It is also a great idea to label or mark the wires. Finally, use a multimeter to verify that the identified power source is able to provide a consistent 12V power supply.
Advanced thieves employ a variety of tactics to bypass the Ghost Immobiliser, including jamming and making false signals. These methods involve amplifying signals from the key fob to your vehicle's electronic controller unit. With the help of advanced anti-jamming technologies and a constant monitoring, you can protect your vehicle from these sophisticated attacks.
Security Enhanced
A ghost immobiliser provides an additional layer of protection for your car against theft. It works with a PIN code security system that can be operated by using buttons that are already on the steering wheel or on your dashboard, making it difficult for thieves to access the device and take your vehicle. The device is designed to be hidden in your vehicle. It doesn't have any lights, or other signals to alert a potential burglar to its presence. It communicates with your car's ECU through the data bus, so it isn't susceptible to the same hacking and relay attacks that can disable traditional security systems.
The system is a valuable investment for those who own luxury cars, since they are at a greater risk of theft due to their worth and the popularity. Its enhanced security features guard against key copying, ECU swapping, and other threats to your car's security. Some ghost immobilisers can also be linked to an app, which means that you can easily arm and dearm them. They may also be equipped with a service/valet option that lets you temporarily disable the immobiliser while your vehicle undergoes repairs or maintenance.
Another great feature of a ghost immobiliser is that it doesn't require wire cutting. This is a good option, particularly if you are driving a car that does not have any built-in immobiliser technology. Certain systems are capable of integrating with the GPS tracking device, thereby providing additional security for your vehicle. A GPS tracker could also lower the cost of insurance. If you decide to purchase a ghost immobiliser, ensure that it is TASSA-verified and that an experienced installer installs the device for you.
Compatibility with all major makes and models
The Ghost Immobiliser is designed to work with all major car models and makes, protecting your pride and joy from theft. It generates a unique pin number by pressing buttons on your steering wheel, console, or door panels. You must enter the code before you can drive. The system is tamper-proof and undetectable. It's also comes with a three-year guarantee. It is also fully accredited by insurance providers This means that it can lower your premiums.
Unlike standard immobilisers, which utilize the key fob of your car to control the ignition of your car and ignition, the Ghost system is connected directly to the engine controller unit through the CAN data bus. This means it is impervious to tampering, and is virtually impossible to disable or remove and is not targeted by organized car theft gangs. Additionally it is possible to use Ghost is tamper-proof, meaning that it is virtually impossible to disable or remove. Ghost system can be linked with an secure iPhone app that allows for remote management and monitoring.
You can set a PIN code that is simple for you to remember but mathematically, it is impossible for thieves to determine. The PIN can be customised and modified at any time and you can keep your vehicle safe even when you park it on the street or in a parking lot. You can also choose the valet or service mode when someone else requires your vehicle temporarily, such as when it is in the garage. This feature is also an excellent way to protect your vehicle from being taken by an unscrupulous mechanic. You can select a Ghost Call alert to give you extra security. It will notify you when your vehicle is moving or has been moved.
Convenience
The ghost immobiliser is a highly efficient security device, protecting your vehicle against common theft methods such as key cloning, key stealing and relay attacks. It works by connecting to the car's data network CAN and preventing communication with the engine ECU. This makes it hard for thieves to hack or replicate your vehicle.
After installation, you'll have to enter a PIN number up to 20 digits long using the buttons on your dashboard or steering wheel to start the engine. The system is completely concealed and thus unnoticeable to thieves. It does not emit radio frequency signals. It can also be set to change the PIN of the user, which adds security. The system is designed to avoid cutting of circuits, making it virtually impossible to alter.
Certain systems let you connect directly to the immobiliser via an app on your phone to disarm it immediately when you forget your PIN. Some systems also have a service/valet setting that allows you to start your car for example when you drop it off at a garage or valet park.
The Ghost Immobiliser is also undetectable to thieves as it does not transmit radio signals, which is a significant advantage over other aftermarket car security systems. Additionally, it is simple to use and does not require any complicated wiring. You can also use it together with a dash camera for added safety. This dash cam is the Thinkware F70, which features clear & sharp HD 1080p dashcam footage as well as Format Free Technology and parking mode. The system can be wired to guarantee maximum performance and longevity.
Installation
It is essential to select the most reliable immobiliser ghost in order to safeguard your vehicle from thieves. This device can stop car thefts by blocking communication between key fobs and the engine controller unit. This device prevents thieves from stealing the signal to start your vehicle. It also can detect the presence of a tamper and notify the owner of the vehicle.
The device is simple to install and integrates with your vehicle's existing systems. It does not require any modifications to the wiring in your vehicle and can be positioned in a hidden place, like under the dashboard. To ensure that the device has been properly installed, follow the instructions in the user's manual. It is also essential to test the system following installing it. This will ensure that the immobiliser ghost is working as intended.
You can purchase an Autowatch Ghost 2 immobiliser and have it installed by a reputable installer. The Key Lab will connect the Ghost to the CAN Bus network in your vehicle, which makes it difficult for thieves to remove or bypass the system. The installation process typically takes between 2 and 3 hours.
During the installation process it is recommended to review the wiring diagram of your vehicle model. This will help you identify the CAN High and CAN Low wires required to connect the Ghost to your vehicle's engine. It is also essential to double-check the connections to ensure that they are secure and insulated.
Once the installation is completed, you can start using the Ghost Immobiliser in a normal manner. It will disable the ignition of your vehicle if you do not start it using the correct PIN, which you can enter yourself. The ghost cost of immobilisers can also be set to Service/Valet mode in the event that you have to surrender your vehicle for maintenance or valet parking.